My friend just moved into her new home, and is having a lot of fun making it her own. She luckily received some hand-me-down furniture (we all know how expensive it can be to furnish a new space), and wanted help revamping this bench for her guestroom! It had a really sturdy base, but the upholstered top was dirty and outdated. This fix took LESS THAN 1 HOUR – including going to the store and buying fabric! Here’s how we did it, including how to calculate fabric yardage.
We proceeded to Jo-Ann Fabrics (which is 2 minutes from my house), and immediately started looking at their upholstery designer fabrics. I like to pair larger organic prints such as paisley or florals with hardlines such as stripes or a mini print. We fell in love with this grey HGTV chevron fabric which is part of the HGTV designer fabric collection. It offset her paisley bedspread and green walls quite nice, and is a trendy print that would immediately bring this bench back to life!
Figuring out the yardage was pretty easy, so I’m going to quickly walk you through a little math lesson. Luckily I have an interior design degree and worked with custom fabric treatments (i.e. windows coverings, pillows, etc), but I know this can be the hardest part and potentially a costly mistake. Using these tips on how to calculate fabric yardage will hopefully help!
How to Calculate Fabric Yardage
First, we measured the area being recovered. This bench was only 45″ wide and the fabric bolt was 55″ wide, so we didn’t have to worry about seams or railroading (turning the bolt sideways) the fabric. 55 inches minus 45 inches = 10″ total of allowance (or 5″ per side) to wrap around the back of the bench and staple – perfect! Next I had to figure out the depth so I could determine how much fabric I needed cut from the bolt.
The bench was about 16″ deep, and I wanted to allow an extra 4″-5″ on either side for staple-gun allowance. 16 inches + 5 inches (allowance top) + 5 inches (allowance bottom) = 26″ total. That’s what I based my overall yardage on, since the 55″ width of the bolted fabric is a standard that stays the same as they simply unroll the bolt for how much fabric you need.
From here, you take the amount in inches (in this case 26″), and ALWAYS divide by 36 to convert inches into yardage of fabric needed. That gave me 0.72 yards of fabric needed. I typically round up to the nearest 1/4 yard because it doesn’t hurt to get just a little extra fabric in case your calculations are off. You can judge this yourself based on how much seam allowance you included and how far off from the next 1/4 yard you are. We ordered 0.75 or 3/4 of a yard.
How to Recover an Upholstered Bench No-Sew Technique
- We started by unscrewing the top of the upholstered bench from the base using a drill.
- We decided the new chevron fabric was thick enough that we could simply recover the bench over the existing fabric, that way we didn’t damage the padding or loose it’s shape. If you can do this, it makes the entire process SO much easier.
- We laid the face of the chevron fabric down so it was facing the ground. Then we put the board on top, front side down. Because this is a geometric print with a repeat, I wanted to measure to make sure it was evenly spaced out on the fabric. I measured the center of the board (where the purple pen is shown below) and lined it up with the center of a chevron point like this. I also eyeballed where I wanted it to hit on the sides.
If you’re not sure, you can always wrap the fabric around the board with your hands and look at it real quick to make sure you like how it’s placed. It’s always better to double check! - Next, we proceeded with stapling the fabric around all 4 sides before proceeding to the corners. Make sure to read my tutorial from when I recovered my kitchen chairs on exactly how to do this, and how to fold the corners which can be the trickiest part.
- From there, simply drill the seat back on the benchtop and you’re done!
Before & After Pics:
Not too shabby for less than an hours worth of work, huh? She plans to eventually stain the piece darker and add new hardware, but at least now it looks fresh and part of this century! 🙂
What do you think of the finished piece and have you tried doing anything like this before? If so, let me know below…I’d love to see your before and after pictures!
